UN- 6.0DC( PLC ) butt welder

1.1 machine plant (0.2-2.0mm):

1.1.1 the PLC combined resistance steel cord for welding machine

1.1.2 manual clamping devices: eccentric clamp tray material for the eccentric stress and pressure spring 9-CR-SI materials, pressure springs made of 60 Silicon manganese materials, vacuum quenching, reaching more than 65 degrees of hardness, abrasion resistance, durability, long life characteristics. Material brass clamping base is 62, JAWS made of beryllium and nickel alloys, using NC linear cutting machine tools to make clamping Groove;

1.1.3-wheel mobile devices: round 2, brake wheel 2, made of imported polyurethane;

1.1.4 the PLC controller devices:

1.1.5 clearance adjustment device: control distance by scale-reading;

1.1.6 annealing: eccentric clamping, clamping base is 62 brass material;

1.1.7 Magnifier work light;

1.1.8 grinding machine: with safety shield, shock absorbers, 0-60 seconds time delay control;

1.1.9 steel cord measuring devices: electronic digital display measuring sensor, automatic control system, accuracy up to 99.9%;

1.1.10 manual cutting tool: blades made of high speed steel;

1.1.11 welded sled: the axis and the line bearings tie slide, low coefficient of friction, axis and the line bearing Germany INA brand.

Technical parameters

1.2.1 source 220/50HZ

1.2.2 welding power 0.6KVA

1.2.3 weld diameter 0.15-2.0mm

1.2.4 welded steel cord

1.2.5 adjusted series stepless adjustment

1.2.6 top breaking pressure 0.5-5N

1.2.7 level 0-2.04V

1.2.9 annealing range 25-55mm

1.2.10 welding rate by more than 90%

1.2.11 dimensions 1050x880x1540mm

1.2.12 product weight 180kg