UN110-1DC(PLC) butt welder

1.1 machine plant (duosi 0.5-1.65mm):

1.1.1 combined resistance steel cord for welding machine

1.1.2 manual clamping devices: the eccentric shaft is 40 chrome, uplift under pressure spring for the double pressure spring pressure adjusting screw adjust the clamping force, the use of long cycle, compacting flexible speed. Material brass clamping base is 62, clamp arm selection of wire cutting, high dimensional accuracy. JAWS made of beryllium and nickel-bronze alloys, using NC linear cutting machine tools to make clamping slot, high dimensional accuracy;

1.1.3-wheel mobile devices: round 2, brake wheel 2, made of imported polyurethane;

1.1.4 control system: PLC control inverter voltage, speed, stability of voltage and current;

1.1.5 work light: low-voltage Magnifier work light;

1.1.6 grinding machine: with safety shield, shock absorber set thread grinding head, and PLC touch screen time;

1.1.7 cord fuse devices: fusing fusing systems, fixtures

1.1.8 welding: arc welding clamp-type movement, good positioning, adjust the welding from the micrometer positioning adjustment, adjust the melt from the micrometer positioning, melting limit electronic limited PLC control, adjust the welding pressure value micrometer positioning at the top.

1.1.9 tempering devices: there are two tempering devices ① welding handle tempered speed at any time. ② special clamp welder any Tempering Tempering method.

1.1.10 the forging equipment: electric hammer devices, PLC controlled touch screen adjustable flow time.

1.1.11 steel cord measuring devices: electronic digital display measuring sensor, automatic control system;

1.1.12 equipped with a twisting device: twisting the open steel cord specifications.

1.1.13 equipped line gauges device: inspecting solder diameter device.

Technical parameters

1.2.1 source 220/380V

1.2.2 welding power 1.0KVA

1.2.3 weld diameter 0.5-1.65mm

1.2.4 welded steel cord

1.2.5 adjusted series stepless adjustment

1.2.6 top breaking pressure 9N

1.2.7 level 0-2.27V

1.2.9 annealing electrode adjusting distance 15-80mm

1.2.10 welding rate by more than 90%

1.2.11 dimensions 1200x1000x1500mm

1.2.12 product weight 180kg

1.2.13 Welding point out breaking strength greater than 40% per cent of the original breaking strength of steel cord